ALC Panels Technical Specifications

بيانات فنية للمنتج

DARAAC ALC panels are lightweight autoclaved aerated concrete wall and floor components for exterior walls, interior partitions, floors, roofs and openings. This page presents editable reference data translated from the supplied product information. Final dimensions and performance requirements are confirmed according to the project, reinforcement design and destination-market standard.

Common Technical Parameters

Common ALC Panel Performance Data
بند المواصفات	المعامل الفني
الدرجة	B05
متوسط قوة الانضغاط	≥ 3.5 MPa
Minimum Compressive Strength	≥ 3.2 MPa
الكثافة الجافة	≤ 525 kg/m³
الموصلية الحرارية	0.13 W/(m.K)
Surface Requirement	Flat surface; edge/groove detail as applicable to the panel type
Length Range	Minimum panel length: 600 mm; length increments: 10 mm

ألواح الجدران الخارجية

Exterior Wall Panel Sizes
Panel Dimensions (L x W x H)	الدرجة	Average / Minimum Compressive Strength	الكثافة الجافة	الموصلية الحرارية
≤ 6000 x 600 x 100-200 mm	B05	≥ 3.5 / ≥ 3.2 MPa	≤ 525 kg/m³	0.13 W/(m.K)
≤ 3750 x 600 x 100 mm	B05	≥ 3.5 / ≥ 3.2 MPa	≤ 525 kg/m³	0.13 W/(m.K)
≤ 4690 x 600 x 125 mm	B05	≥ 3.5 / ≥ 3.2 MPa	≤ 525 kg/m³	0.13 W/(m.K)
≤ 5750 x 600 x 150 mm	B05	≥ 3.5 / ≥ 3.2 MPa	≤ 525 kg/m³	0.13 W/(m.K)
≤ 6000 x 600 x 175 mm	B05	≥ 3.5 / ≥ 3.2 MPa	≤ 525 kg/m³	0.13 W/(m.K)
≤ 6000 x 600 x 200 mm	B05	≥ 3.5 / ≥ 3.2 MPa	≤ 525 kg/m³	0.13 W/(m.K)

ألواح الأرضية

Floor Panel Sizes
Panel Dimensions (L x W x H)	الدرجة	Average / Minimum Compressive Strength	الكثافة الجافة	الموصلية الحرارية
≤ 2100 x 600 x 100 mm	B05	≥ 3.5 / ≥ 3.2 MPa	≤ 525 kg/m³	0.13 W/(m.K)
≤ 2700 x 600 x 125 mm	B05	≥ 3.5 / ≥ 3.2 MPa	≤ 525 kg/m³	0.13 W/(m.K)
≤ 3400 x 600 x 150 mm	B05	≥ 3.5 / ≥ 3.2 MPa	≤ 525 kg/m³	0.13 W/(m.K)
≤ 4500 x 600 x 200 mm	B05	≥ 3.5 / ≥ 3.2 MPa	≤ 525 kg/m³	0.13 W/(m.K)
≤ 5700 x 600 x 250 mm	B05	≥ 3.5 / ≥ 3.2 MPa	≤ 525 kg/m³	0.13 W/(m.K)
≤ 6000 x 600 x 300 mm	B05	≥ 3.5 / ≥ 3.2 MPa	≤ 525 kg/m³	0.13 W/(m.K)

ألواح الجدران الداخلية

Interior Wall Panel Sizes
Panel Dimensions (L x W x H)	الدرجة	Average / Minimum Compressive Strength	الكثافة الجافة	الموصلية الحرارية
≤ 3000 x 600 x 75 mm	B05	≥ 3.5 / ≥ 3.2 MPa	≤ 525 kg/m³	0.13 W/(m.K)
≤ 4250 x 600 x 100 mm	B05	≥ 3.5 / ≥ 3.2 MPa	≤ 525 kg/m³	0.13 W/(m.K)
≤ 5050 x 600 x 125 mm	B05	≥ 3.5 / ≥ 3.2 MPa	≤ 525 kg/m³	0.13 W/(m.K)
≤ 6000 x 600 x 150 mm	B05	≥ 3.5 / ≥ 3.2 MPa	≤ 525 kg/m³	0.13 W/(m.K)

Ultra-Thin Panels, Roof Panels and Lintels

Special ALC Panel Dimensions
Product Type	الأبعاد المتاحة (الطول × العرض × الارتفاع)	الدرجة
Ultra-Thin Panels	1800 / 2000 / 2200 x 600 x 50 mm	B05
ألواح السقف	≤ 2200 x 600 x 75 mm; ≤ 3000 x 600 x 100 mm; ≤ 3890 x 600 x 125 mm; ≤ 4500 x 600 x 150 mm; ≤ 5720 x 600 x 200 mm; ≤ 6000 x 600 x 250 mm	B05
Lintels	≤ 3000 x 250 x 200 / 250 mm; ≤ 3000 x 240 x 200 / 250 mm; ≤ 3000 x 200 x 200 / 250 mm; ≤ 3000 x 150 x 200 / 250 mm; ≤ 3000 x 120 x 200 / 250 mm; ≤ 3000 x 100 x 200 / 250 mm	B05

All special panel categories use the common B05 performance data shown above. Availability and reinforcement requirements should be checked for the individual project.

Need an ALC panel solution for your project?

Send the application, wall or floor design, dimensions, quantity and destination country to receive a project-specific recommendation.

Request ALC Panel Information

ALC panels: what to confirm before ordering

For a useful ALC panel enquiry, provide the proposed wall location, panel dimensions or layout, quantity, handling conditions, lifting access, destination and required documents. Connection details and installation sequencing should be reviewed for the specific building.

Can general panel information determine final suitability?

No. General product information supports planning. The final panel specification and installation details should be confirmed against project drawings and applicable local requirements.

البحث الساخن